Sika
Sikament
SuperplasticiserDensely reinforced structures; ready-mix & site-batched concrete; pumped and sprayed concrete
Request details
Sika Products List
All 165 Sika products we supply, grouped by category. Select Request details on any product for availability, technical data and price.
- Concrete Admixtures 5
- Flooring Solutions 32
- Grouts & Resin Anchors 17
- Waterproofing 34
- Protection Systems 20
- Repair & Strengthening Systems 38
- Tile Adhesives & Grouts 13
- Watertight Injection Systems 6
Sika Concrete Admixtures 5
About Concrete Admixtures
Sika
Sika
Sikaplast
SuperplasticiserReady-mixed concrete; high-workability mixes; precast concrete
Request details
Sika
Sika ViscoCrete
SuperplasticiserSelf-compacting concrete; fast-track construction; precast concrete
Request details
Sika
Sika ViscoFlow
SuperplasticiserMass raft foundations; pumped concrete; extended workability retention; HPC
Request details
Sika
Sika Plastocrete
SuperplasticiserWater-retaining structures; structural & mass concrete; special concrete placement conditions
Request detailsSika Flooring Solutions 32
About Flooring Solutions
Sika
Sika Chapdur (IN)
Non-metallic dry shake surface hardener (grey)Manufacturing areas, warehouses & stores, parking decks & ramps, high pedestrian traffic; non-rusting, suits vacuum dewatered floors; light duty 3.5–4 kg/m², moderate 4.5–5.0 kg/m², heavy 5.5–6 kg/m²
Request details
Sika
Sikafloor Quartz Top 100
Coloured non-metallic dry shake surface hardenerManufacturing areas, warehouses, parking decks, high pedestrian traffic and commercial floors requiring cementitious terrazzo finish; light duty 3–5 kg/m², moderate 5–6 kg/m², heavy 6–8 kg/m²
Request details
Sika
Sikafloor 931 Finishing Aid
Colloidal silica finishing aid & densifierUsed with dry shake floor hardeners to enhance workability, reduce delamination and increase surface gloss and density; ~0.027–0.055 kg/m² per coat (max 0.07 kg/m²)
Request details
Sika
Sikafloor Syntop 410
Emery based non-metallic dry shake hardenerHigh abrasion resistant hardener for heavy traffic areas, manufacturing areas, warehouses and parking decks; colours available; light duty 3–5 kg/m², moderate 5–6 kg/m², heavy 6–8 kg/m²
Request details
Sika
Sika Curehard 24
Sodium silicate hardening & dust proofing liquidSurface applied hardener for warehouse floors, manufacturing areas and high pedestrian traffic; works even on old floors; 0.15–0.25 kg/m² per coat in 2–3 coats
Request details
Sika
Sikafloor 934 Li
Lithium silicate hardening & dust proofing liquidSurface applied hardener for warehouse, manufacturing, high pedestrian traffic and commercial floors; 0.15–0.25 kg per coat (diluted 1 : 1–3 with soft water)
Request details
Sika
Sikafloor Metal Top 300
Heavy duty metallic floor toppingVery high impact / wear resistance for loading docks, steel and mining industry floors, bunkers, tunnels and floors with tracked vehicles; min. 15 mm, 25 mm recommended for very heavy duty
Request details
Sika
SikaUcrete MF
Self-smoothing PU-cementitious flooring (4–6 mm)Clean rooms, chemical process areas, food & beverages and bulk drug plants; anti-bacterial finish, thermal shock resistant up to 70°C; 8 kg/m² at 4 mm, 12 kg/m² at 6 mm
Request details
Sika
SikaUcrete UD200
Heavy-duty PU-cementitious floor toppingChemical and wet process areas, food & beverages and bulk drug plants; serviceable from -40°C to +130°C at 12 mm; top coat 13 kg/m² (6 mm), 18 kg/m² (9 mm), 24 kg/m² (12 mm)
Request details
Sika
SikaUcrete HF 60RT
6 mm heavy duty polyurethane floor finishChemical and wet process areas, food & beverages and bulk drug plants; hygienic, chemical, wear and impact resistant; resists –25°C to 80°C; top coat 13 kg/m² at 6 mm
Request details
Sika
SikaUcrete DP
Textured defined profile PU-cementitious flooringEnhanced operational safety in meat processing, food and beverage, dairies and commercial kitchens; profiles DP 10 (R11), DP 20 (R12), DP 30 (R13) in 4, 6 and 9 mm
Request details
Sika
SikaUcrete MF 40 AS
Anti-static self-smoothing PU-cementitious flooringClean rooms, solvent handling areas, operation theatres and electronics plants; complies to BS5958, EN1081, DIN51953 and EN61340; top coat 6 kg/m² at 4 mm
Request details
Sika
Sikafloor-80 EpoCem Primer
Water based epoxy primerPrimer for Sikafloor-81 / -82 EpoCem underlayment screeds on substrates with rising moisture; 0.2–0.4 kg/m²
Request details
Sika
Sikafloor-81 EpoCem
Epoxy-cement self-smoothing screed (2.0–3.0 mm)Temporary moisture barrier before epoxy floor coatings and self-smoothing underlay screed; prevents osmotic blistering; 2.25 kg/mm/m²
Request details
Sika
Sikafloor-82 EpoCem
Epoxy-cement self-smoothing screed (3.0–7.0 mm)Temporary moisture barrier before epoxy floor coatings and self-smoothing underlay screed; prevents osmotic blistering; 2.25 kg/mm/m²
Request details
Sika
Sikafloor 41 PurCem N
Self-smoothing PU-cementitious flooring (4–6 mm)Clean rooms, chemical process areas and bulk drug plants; anti-bacterial, thermal shock resistant up to 60°C, applicable down to 18°C; 7.6 kg/m² at 4 mm, 11.4 kg/m² at 6 mm
Request details
Sika
Sikafloor-31 PurCem IN
Thin PU cementitious hybrid sealer coatingThin seal coat for coves and details and improved finish on old PurCem floors; solvent free; ~0.200–0.250 kg/m² per coat
Request details
Sika
Sikafloor-49 PurCem
PU hybrid render & coving mortarHigh strength, chemical and thermal shock resistant mortar for coving and vertical rendering in food processing, chemical and pharmaceutical plants and laboratories
Request details
Sika
Sikafloor 264 HC N
Self-smoothing epoxy industrial flooring (0.5–3 mm)Automotive, pharmaceutical labs and clean rooms, manufacturing and storage, electronics, chemical, textile and paper industries, car parks; durable and chemically resistant
Request details
Sika
Sikafloor 1225
Self-smoothing epoxy industrial flooring (1 mm)Automotive, pharmaceutical labs and clean rooms, manufacturing and storage, electronics, chemical industry and car parks; 1.6 kg/m² at 1 mm
Request details
Sika
Sikafloor 1230
Self-smoothing epoxy industrial flooring (2 mm)Automotive, pharmaceutical labs and clean rooms, manufacturing and storage, electronics, chemical industry and car parks; 3.2 kg/m² at 2 mm
Request details
Sika
Sikafloor 295
Self-smoothing epoxy industrial flooring (1–2 mm)Automotive, pharmaceutical labs and clean rooms, manufacturing and storage, electronics and chemical industry; 1.7 kg/m² at 1 mm, 3.4 kg/m² at 2 mm
Request details
Sika
Sikafloor 291
3-component self-smoothing underlay screed1.5–3 mm underlayment for manufacturing & storage, trafficked areas, re-profiling worn floors and car parks; can be top coated with epoxies and PUs; 2.2 kg/mm/m²
Request details
Sika
Sikafloor 296
Epoxy self-smoothing floor underlayment resin0.5, 1 and 2 mm underlayment for manufacturing & storage, re-profiling worn floors and car parks; with Sika Quartz-05 IN: 0.8 kg/m² (0.5 mm), 1.7 kg/m² (1 mm), 3.8 kg/m² (2 mm)
Request details
Sika
Sikafloor 161 HC
Multipurpose epoxy primer & binderPrimer for concrete, cement screeds and epoxy mortars; binder for levelling mortars and screeds; solvent free; 0.2–0.3 kg/m² as primer
Request details
Sika
Sikafloor 167 Primer
Epoxy primerPrimer for levelling screeds, mortars and self-levelling epoxy / PU top coats on strongly absorbent substrates; solvent free; 0.2–0.3 kg/m²
Request details
Sika
Sikafloor-223 W Conductive
Water based epoxy conductive primerConductive primer below Sikafloor electrostatic conductive floor coatings; resistance to ground Rg ≤ 5 × 10⁵ Ω as per EN 1081; ~0.1–0.12 kg/m²
Request details
Sika
Sikafloor DTZ
Decorative seamless epoxy terrazzo systemHospitals, restaurants, cafés, showrooms, government and public buildings and shopping centres; enhanced anti-slip, solvent-free low odour; multi-layered system
Request details
Sika
Sikafloor-294 EPU
Epoxy polyurethane self-smoothing flooring resinNormal to medium heavy wear interior floors: assembly halls, warehouses, workshops, garages and aircraft hangars; glossy, anti-slip; ~1.7 kg/m² (1 mm), ~3.4 kg/m² (2 mm)
Request details
Sika
Sikafloor XTC
Odourless self-smoothing flooring (Xolutec technology)Automotive lines, pharmaceutical plants & laboratories, heavy engineering workshops, aircraft maintenance and warehouse floors; fast curing at low temperature, moisture tolerant
Request details
Sika
Sikafloor-368 SF
PU tough-elastic coloured seal coatIndustrial production and storage floors, wet working areas, car park decks, garages, aircraft hangars and loading ramps; crack-bridging, solvent free, matt finish; ~0.5–0.6 kg/m²
Request details
Sika
Sikafloor-367
2-part polyurethane coloured floor coatingStorage & packaging areas, foot traffic and service floor areas across sectors; tough elastic, matt finish; ~0.125–0.150 kg/m² per layer
Request detailsSika Grouts & Resin Anchors 17
About Grouts & Resin Anchors
Sika
SikaGrout 104 IN
Non-shrink cementitious groutReady to use free flow, high precision, non-shrink, expanding pouring cementitious grout with 28 days compressive strength of 50 MPa
Request details
Sika
SikaGrout-214 IN S
Shrinkage compensated cementitious groutReady to use free flow, high precision, shrinkage compensated, expanding pouring cementitious grout with 28 days compressive strength of 65 MPa
Request details
Sika
SikaGrout-214 IN
Non-shrink cementitious groutFree flow, high precision, non-shrink, expanding pouring grout with 28 days compressive strength of 65 MPa; dynamic load tested at 500 cycles per minute for 2 million cycles
Request details
Sika
SikaGrout-214 HES IN
High early strength cementitious groutFree flow, non-shrink grout with improved early strength: 20 MPa in 3 hrs, 25 MPa in 6 hrs and 55 MPa in 28 days
Request details
Sika
SikaGrout-880 IN
Iron reinforced precision groutNon-shrink, iron reinforced precision grout with high early and ultimate strengths of 95 MPa
Request details
Sika
SikaGrout-3200 IN
Wind tower precision groutFatigue certified onshore wind tower precision grout with 28 days compressive strength of 105 MPa
Request details
Sika
SikaGrout-9375 IN
High strength grout for wind turbinesFree flow, non-shrink grout for onshore wind turbine installations: 50 MPa in 1 day, 75 MPa in 7 days and 100 MPa in 28 days
Request details
Sika
Sikadur-42 IN
Epoxy resin groutFree flow, shrinkage free, high strength epoxy grout with 7 days compressive strength of 60 MPa; for layer thickness of 10–40 mm
Request details
Sika
Sikadur-42 HES IN
High early strength epoxy groutFree flow epoxy grout with 100 MPa in 1 day, 110 MPa in 7 days and 120 MPa in 28 days; for layer thickness of 25–75 mm
Request details
Sika
Sikadur-42 MP IN
Low exotherm epoxy groutFree flow epoxy grout with low exothermic reaction and 7 days compressive strength of 90 MPa; for layer thickness of 25–125 mm
Request details
Sika
SikaFlow-410
Low exotherm epoxy precision groutPrecision, heavy duty grouting with 40 MPa in 1 day and 100 MPa in 7 days; for layer thickness of 10–300 mm
Request details
Sika
SikaFlow-648
Epoxy precision groutPrecision grout for critical equipment transmitting static and dynamic loads; 75 MPa in 1 day and 100 MPa in 7 days; 25–150 mm layers
Request details
Sika
Sikadur-53 FLV
Moisture tolerant epoxy resin groutSealing cracks > 5 mm by injection in dry, damp, wet or underwater conditions; bridge bearings and rail tracks (5–50 mm)
Request details
Sika
Sikadur-53 UF Grout
Moisture insensitive epoxy resin groutFlowable high early strength grout: 20 MPa in 3 hrs, 40 MPa in 6 hrs and 80 MPa in 7 days; for layer thickness of 10–50 mm
Request details
Sika
Sika AnchorFix-2+ Tropical
Epoxy acrylate anchoring adhesiveETA approved, solvent and styrene free adhesive for rebar & threaded rod installation in tropical climate conditions
Request details
Sika
Sika AnchorFix-3001
Pure epoxy anchoring adhesiveETA approved, 1:1 ratio adhesive for cracked and uncracked concrete under normal and seismic conditions (seismic category C1)
Request details
Sika
Sika AnchorFix-3030
Epoxy anchoring adhesiveETA approved, thixotropic adhesive for threaded rods and rebars in cracked and uncracked, dry or damp concrete; seismic C-1 & C-2 approval
Request detailsSika Waterproofing 34
About Waterproofing
Sika
SikaTop 107 Seal IN
Polymer modified cementitious waterproofing coatingTwo part, acrylic polymer modified cementitious liquid applied waterproofing coating; CFTRI approved for potable drinking water tanks; ~0 mm water penetration at 5 bar for 72 h (BS EN 12390-8); 3 kg/sqm in two coats
Request details
Sika
SikaTop 551 IN
Elastomeric cementitious waterproofing coatingElastomeric flexible, two component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof concrete and masonry; elongation ~120%; 1.8–2 kg per sqm in two coats
Request details
Sika
SikaTop 109 Seal IN
Crack bridging cementitious waterproofing coatingElastomeric, liquid applied, crack bridging two part acrylic polymer modified coating; elongation ≥ 180% with crack bridging up to 2 mm; ~0 mm water penetration at 5 bar for 72 h; 2.2–2.5 kg per sqm in two coats
Request details
Sika
Sika 101h
Crystalline waterproofing systemCement based powder crystalline waterproofing for concrete and mortar to prevent water infiltration or seepage in low pressure areas of concrete or any cementitious substrate; 2.4 kg per sqm in two coats
Request details
Sika
Sika 108 Waterplug IN
Rapid setting leak plugging mortarRapid setting mortar for plugging water leakage instantly; mixed with ~1.30–1.40 L of water
Request details
Sika
SikaShield P 22 PE, 3 mm
APP modified torch-on membrane3 mm thick APP modified, composite matt reinforced, plain finish torch-on membrane; roll of 10 sqm
Request details
Sika
SikaShield P 24 PE, 3 mm
APP modified torch-on membrane3 mm thick APP modified, polyester matt reinforced, plain finish torch-on membrane; roll of 10 sqm
Request details
Sika
SikaShield P 24 PE, 4 mm
APP modified torch-on membrane4 mm thick APP modified, polyester matt reinforced, plain finish torch-on membrane; roll of 10 sqm
Request details
Sika
SikaShield P 24 MG, 4 mm
APP modified torch-on membrane (mineral finish)4 mm thick APP modified, composite matt reinforced, mineral finish torch-on membrane; roll of 10 sqm
Request details
Sika
SikaShield P 35 PE, 4 mm
Premium APP modified torch-on membrane4 mm thick APP modified, polyester matt reinforced, premium quality plain finish torch-on membrane with -5 cold flexibility; roll of 10 sqm
Request details
Sika
SikaShield P 35 MG, 4 mm
Premium APP modified torch-on membrane (slate finish)4 mm thick APP modified, polyester matt reinforced, premium quality slate mineral finish torch-on membrane with -5 cold flexibility; roll of 10 sqm
Request details
Sika
SikaShield P 24 S, 3 mm
APP modified torch-on membrane (sand finish)3 mm thick APP modified, polyester matt reinforced, sand finish torch-on membrane designed to be used as a fully bonded membrane; roll of 10 sqm
Request details
Sika
SikaShield W 162 HDPE ES, 1.5 mm
Wet bonded bituminous membrane1.5 mm thick wet bonded polymer modified reinforced bituminous membrane with cross laminated PE film on top face; roll of 10 sqm
Request details
Sika
SikaShield W 162 ED, 1.5 mm
Wet bonded bituminous membrane1.5 mm thick wet bonded polymer modified reinforced bituminous membrane with double side adhesive and release liner on both faces; roll of 10 sqm
Request details
Sika
SikaShield W 159 ED, 1.5 mm
Wet bonded bituminous membrane1.5 mm thick wet bonded polymer modified bituminous membrane with double side adhesive and PE reinforcement in the centre core; roll of 20 sqm
Request details
Sika
SikaShield-722, 1 x 20 x 1.5 mm
Peel and stick SBS membrane1.5 mm peel and stick SBS modified bituminous membrane with cross laminated PE film at top; roll of 20 sqm
Request details
Sika
SikaShield Primer W 30
Water based primerWater based primer for APP torch-on SikaShield membranes; 0.250–0.400 litre/m² per coat
Request details
Sika
SikaShield Primer S-30 IN
Solvent based primerOil / solvent based primer for APP and SBS self adhesive SikaShield membranes; 0.200–0.400 kg/m² per coat
Request details
Sika
Sikadur-Combiflex SG 20P 2000
Joint & crack sealing system (2 mm)2 mm thick joint and crack sealing system for construction, movement (expansion) and connection joints or cracks; allows high movement while maintaining a watertight seal; 2 m wide roll of 25 m
Request details
Sika
Sikadur-Combiflex SG 10P 2000
Joint & crack sealing system (1 mm)1 mm thick joint and crack sealing system for construction, movement (expansion) and connection joints or cracks; allows high movement while maintaining a watertight seal; 2 m wide roll of 25 m
Request details
Sika
Sikadur-Combiflex Adhesive IN
Epoxy adhesive for Combiflex tapes2-part epoxy thixotropic adhesive for bonding Sikadur-Combiflex SG FPO waterproofing tapes to different substrates; internal and external use; 1–1.7 kg/RM
Request details
Sika
SikaSwell A
Hydro-swelling sealing profileRectangular acrylic profile that swells in contact with water to seal all types of construction joints and penetrations in concrete structures
Request details
Sika
SikaSwell S2
Hydro-swelling PU sealant1-part polyurethane hydrophilic sealant that swells in contact with water to seal construction joints and penetrations; also used to adhere SikaSwell A and P profiles; ~4–6 RM per sausage
Request details
Sika
Sika Raintite
Acrylic polymer emulsionMultifunctional acrylic polymer for mortar, concrete, grout or cement slurry; used as waterproofing coating with cement in 1:2 ratio; 200–250 g per sqm in two coats
Request details
Sika
Sika Cemcrete
Acrylic polymer for cementAcrylic polymer that improves cement slurry, mortar and concrete for new construction and refurbishment work; 200–250 g per sqm in two coats
Request details
Sika
SikaProof 312 HDPE SG IN
Fully bonded HDPE sheet membraneHDPE based self adhesive fully bonded sheet membrane with sand sprinkled layer for below ground waterproofing; loose laid before fixing reinforcement and casting concrete
Request details
Sika
SikaProof 312 HDPE SG W IN
Fully bonded HDPE sheet membrane with weldable selvedge1.2 mm HDPE based self adhesive fully bonded membrane with heat weldable selvedge for below ground waterproofing of reinforced concrete structures
Request details
Sika
SikaProof 315 HDPE SG W IN
Fully bonded HDPE sheet membrane with weldable selvedge1.5 mm HDPE based self adhesive fully bonded membrane with heat weldable selvedge for below ground waterproofing of reinforced concrete structures
Request details
Sika
SikaProof Sandwich Tape-100 IN
Double sided self-adhesive tapeEnd lap treatment tape for the SikaProof-312 / 315 HDPE SG membrane system; 100 mm wide roll
Request details
Sika
SikaProof 730 UVS
Pre-applied HDPE membrane (UV stable)1.2 mm HDPE membrane with pressure sensitive adhesive and silicone based top liner for better UV stability; good chemical adhesion with concrete
Request details
Sika
SikaProof 731
Dual lap adhered HDPE membraneHDPE membrane with pressure sensitive adhesive and mineral aggregates that becomes monolithic with fresh concrete; 1.2 mm and 1.5 mm thick
Request details
Sika
SikaProof-936, 80 x 50
Double sided sticky tapeEnd lap treatment tape for the SikaProof-731 HDPE membrane system; 80 mm wide, 50 m roll
Request details
Sika
SikaProof-937 S, 120 x 50
Single sided HDPE self-adhesive tapeWhite tape for underground waterproofing termination detailing with SikaProof membrane systems; 120 mm x 20 m roll
Request details
Sika
Sikaplan WP 1100-20 HL
PVC-p sheet waterproofing membraneFlexible 2.0 mm homogeneous membrane with signal layer for basements and tunnels; CE marked to EN 13491 and EN 13967; 2 m x 20 m roll
Request detailsSika Protection Systems 20
About Protection Systems
Sika
Sika FerroGard-903
Surface applied corrosion inhibitorPenetrates the surface and protects embedded steel reinforcement from further corrosion; ~0.5 kg/m² per coat
Request details
Sika
Sika FerroGard-950 IN
Zinc rich epoxy coatingProtective coating and primer for steel reinforcement; 0.15–0.25 kg/m² per coat
Request details
Sika
Sikagard-550 W IN
Crack bridging anti-carbonation coatingProtective coating for concrete complying to IRC:SP:80 and MoRTH guidelines; 2 coats
Request details
Sika
Sikagard-551 S Elastic Primer
Silane siloxane primerPrimer for all kinds of concrete surfaces and difficult application conditions
Request details
Sika
Sikagard-552 IN Primer W
Water based acrylic primerPrimer for protective coatings
Request details
Sika
Sikagard-300
Crack bridging elastomeric acrylic coatingWater based, aliphatic protective and waterproof coating for concrete & masonry; 2 coats
Request details
Sika
Sikagard-399
Water based acrylic primerPrimer for mineral substrates before anti-carbonation coatings
Request details
Sika
Sikagard-180
High build epoxy coatingNon-toxic, solvent free protective coating for concrete and metal; 2 coats
Request details
Sika
Sikagard-62 IN
Food grade epoxy coatingChemical resistant protective coating for concrete, stone, cementitious mortars and steel
Request details
Sika
Sikagard-63
Chemical resistant epoxy coatingSolvent free, 100% solid, coloured thixotropic protective coating with high chemical resistance; 2 coats
Request details
Sika
Sikagard-67
Drinking water tank epoxy coatingWater based, solvent free, odourless coating for drinking water tanks; CFTRI certified
Request details
Sika
Sikagard PU UR
UV resistant polyurethane coatingProtective coating and sealer coat for concrete and steel structures; 2 coats
Request details
Sika
Sikagard M 790
Chemical resistant crack bridging coatingCE certified Xolutec coating for waterproofing and protection in harsh conditions; resistant to biogenic sulphuric acid at sewage treatment plants
Request details
Sika
Sikagard P 770
Long pot life primerXolutec primer for high end protective coatings in aggressive conditions
Request details
Sika
Sikagard-625 ClearCoat
Transparent acrylic coatingStain protection, water repellent and UV-resistant coating for natural stone, concrete, masonry, patios, paths, block paving and facades; ~0.12–0.15 kg/m² per coat
Request details
Sika
Sika Block Joining Mortar
Non-shrink block joining mortarJoining AAC blocks, concrete blocks and fly ash bricks; high tensile adhesion; ~3–4 kg/m² for 3 mm layer thickness
Request details
Sika
SikaCeram Sealing Membrane W
Waterproofing & decoupling membraneFlexible, crack-bridging membrane under tiles for bathrooms, wet areas, kitchens, laundries, spas and heated floors; 1 m x 30 m roll covers ~30 m²
Request details
Sika
SikaWall-444 Aqua Seal
Elastomeric waterproof coatingDecorative exterior finish for exterior walls, concrete, masonry, gypsum and cement fibre boards; UV and stain resistant, crack-bridging; ~0.2–0.3 L/m² for 2 coats
Request details
Sika
SikaWall-720 E
Polymer-based internal skim coat (paste)Interior walls, filling cracks and nail holes, graffiti removal; smooth white finish; ~0.5–1 kg/m² for full skim coating
Request details
Sika
Sika Cracksil Acrylic Paste
Acrylic crack sealing pasteReady-to-use paste for sealing hairline cracks (up to 6 mm) in masonry and plastered surfaces; ~1 kg covers 40–50 linear metres (6 mm x 6 mm)
Request detailsSika Repair & Strengthening Systems 38
About Repair & Strengthening Systems
Sika
SikaEmaco S 346
Micro concreteFree flow, high strength micro concrete for structural concrete repair with compressive strength of 40 MPa in 28 days
Request details
Sika
Sikacrete-145 IN
Non-shrink micro concreteNon-shrink cementitious micro concrete for column jacketing during repair work with compressive strength of 50 MPa in 28 days
Request details
Sika
Sikadur-31 IN
Structural epoxy adhesive & repair mortarBonding different substrates, fast setting crack sealing, repair mortar & adhesive for layers up to 30 mm
Request details
Sika
Sikagard-694 F(I)
Epoxy puttyMoisture insensitive putty for underwater, dry & damp surfaces; sealing cracks in concrete, metal and wood, drainage cut-outs for waterproofing
Request details
Sika
Sikadur-31 SBA S-02 IN
Segmental bridge adhesiveSegmental bridge adhesive for substrates at +25°C to +45°C; complies with FIP, BS, ASTM and MoRTH standards
Request details
Sika
Sikadur-32 IN
Epoxy structural bonding agentOld to new concrete bonding with bond strength > 10 MPa in 7 days; pot life 55 minutes
Request details
Sika
Sikadur-32 LP IN
Long pot life epoxy bonding agentOld to new concrete bonding with bond strength > 10 MPa; pot life > 4 hrs and open time > 7 hrs at +30°C; ASTM C 881
Request details
Sika
Sikadur-43 HE (h)
Epoxy insulation & repair mortarPatch repair, void filling and pot lining of aluminium smelters up to 50 mm; 1 day > 85 MPa, 7 days > 100 MPa
Request details
Sika
Sikadur-52 IN SLV Mortar
Low temperature epoxy mortarSpillway & pier repair at dams; 70 MPa in 7 days at +15°C; complies with ASTM C881 and CWC & NHPC guidelines
Request details
Sika
Sikadur-53 UF
Underwater epoxy injection groutUnderwater injection grouting at dams, bridge piers and rail track bolts; strength > 50 MPa
Request details
Sika
Sikadur-55 LP IN
Epoxy injection resin & crack sealerCrack injection in structural concrete slabs, columns, beams, walls and foundations; 70 MPa compressive strength; ASTM C 881
Request details
Sika
Sika CarboDur S
Carbon fibre (CFRP) platesETA approved externally bonded FRP system for strengthening RCC structures; tensile strength > 3100 MPa, e-modulus 165 GPa
Request details
Sika
Sika CarboDur LAM
Carbon fibre laminatesExternally bonded FRP system for strengthening RCC structures; tensile strength > 2800 MPa, e-modulus 165 GPa
Request details
Sika
Sika CarboDur BC
Carbon fibre rodsNear surface mounted reinforcement bonded into slots; tensile strength > 3100 MPa, e-modulus 148 GPa
Request details
Sika
Sikadur-30 LP IN
Epoxy structural adhesiveStructural grade thixotropic adhesive for carbon laminates & BC rods
Request details
Sika
Sikadur-300 IN
Epoxy impregnating / laminating resinImpregnating resin for SikaWrap structural strengthening fabrics (CFRP / GFRP)
Request details
Sika
Sikadur-330 IN
Thixotropic epoxy laminating resinThixotropic impregnating adhesive for SikaWrap structural strengthening fabrics (CFRP / GFRP)
Request details
Sika
SikaWrap-301 C IN
Carbon fibre wrap (300 GSM)Unidirectional woven carbon fibre fabric for dry application; tensile strength > 4900 MPa, modulus 250 GPa
Request details
Sika
SikaWrap-451 C IN
Carbon fibre wrap (450 GSM)Unidirectional woven carbon fibre fabric for dry application; tensile strength > 4900 MPa, modulus 250 GPa
Request details
Sika
SikaWrap-601 C IN
Carbon fibre wrap (600 GSM)Unidirectional woven carbon fibre fabric for wet application; tensile strength > 4900 MPa, modulus 250 GPa
Request details
Sika
SikaWrap-931 G IN
Glass fibre wrap (930 GSM)Unidirectional woven glass fibre fabric for dry application; tensile strength > 3750 MPa, modulus 80 GPa
Request details
Sika
SikaLatex Power
SBR multipurpose polymerMultipurpose admixture for waterproofing, repair, coating, injection & concrete
Request details
Sika
SikaLatex SBR
SBR multipurpose polymerMultipurpose admixture for waterproofing, repair, coating & plaster
Request details
Sika
SikaLatex Super
SBR multipurpose polymerMultipurpose admixture for waterproofing, repair & coating
Request details
Sika
SikaEmaco SBR 2
High dispersion SBR latexBonding, waterproofing & repair without dilution; site batched mortars and waterproofing / bonding slurry / screed
Request details
Sika
SikaCem-135 Intraplast
Aluminium free expanding grout admixtureInjection grouting complying to MoRTH guidelines; > 28 MPa at 200 g per 50 kg bag of cement
Request details
Sika
SikaCem-130 Intraplast
Expanding grout admixturePressure / injection grouting as per ASTM C937 to prevent segregation; 200 g per 50 kg bag of cement
Request details
Sika
Sika Rustoff-100
Passivating rust removerRust removal on steel reinforcement; 0.12–0.15 kg/m² per coat in 2 coats
Request details
Sika
Sika Rustop
Corrosion protection coatingProtection of new or old reinforcement steel and concrete from corrosion
Request details
Sika
Sika MonoTop-1010 IN
Bonding primer & corrosion protectionCementitious anti-corrosive cum bonding primer for steel & concrete; compressive strength of 50 MPa
Request details
Sika
SikaTop-122 HS
Polymer modified repair mortarHand and machine applied patch repair for horizontal & vertical works; strength of 55 MPa
Request details
Sika
Sika MonoTop-122 F
Fibre reinforced repair mortarDual shrinkage compensated trowelable patch repair for horizontal & vertical works; > 50 MPa in 28 days
Request details
Sika
SikaEmaco S 348
Structural repair mortarDual shrinkage compensated, thixotropic mortar for horizontal, vertical and overhead repairs; 45 MPa in 28 days
Request details
Sika
Sika MonoTop-412 IN
Structural repair mortar (EN 1504-3 R4)CE certified, fibre reinforced, sulphate resistant mortar for repair of spillways & piers at dams; 60 MPa in 28 days
Request details
Sika
SikaEmaco S 488
Very high strength repair mortarDual shrinkage compensated, thixotropic mortar for horizontal, vertical and overhead repairs; 70 MPa in 28 days
Request details
Sika
SikaEmaco S 650
Fast setting patching mortarRoadway patching for 10–50 mm horizontal repairs; 15 MPa in 3 hrs and 50 MPa in 28 days
Request details
Sika
SikaEmaco N 303
Non-structural reprofiling mortarPolymer modified repair and reprofiling mortar for hand or trowel application up to 10 mm
Request details
Sika
Sikagard-720 EpoCem IN
Epoxy modified cementitious levelling mortarMoisture barrier, pore filler and levelling mortar for concrete, mortar or stone in aggressive and chemical environments
Request detailsSika Tile Adhesives & Grouts 13
About Tile Adhesives & Grouts
Sika
SikaCeram-50 Tilofix
Polymer-modified tile adhesiveAdhesive for residential tiles up to 4 sq ft; bonding ceramic and vitrified tiles on residential walls, floors, balconies and terraces; ~4–4.5 kg/m² for 3 mm thickness
Request details
Sika
SikaCeram-125 Easy Fix
Normal-setting tile adhesive (IS 15477 Type 1, EN 12004-1 CIT)Residential indoor ceramic / vitrified tiles in bathrooms, kitchens and residential terraces; reduced slip; ~3–3.5 kg/m² for 3 mm thickness
Request details
Sika
SikaCeram-155 Wet Room
Polymer-modified tile adhesive (IS 15477 Type 2, EN 12004-1 CITE)No vertical slip adhesive for vitrified and ceramic tiles in balconies, bathrooms, kitchens, wet areas and tile-on-tile applications; ~3 kg/m² for 3 mm thickness
Request details
Sika
SikaCeram-212 Non-Slip
Cementitious tile adhesive (IS 15477 Type 2, EN 12004-1 C2T)Small, medium and large ceramic & vitrified tiles on walls, floors, balconies, kitchens, bathrooms and wet areas; ~3–3.5 kg/m² for 3 mm thickness
Request details
Sika
SikaCeram-255 Large Tile
High-performance cementitious adhesive (IS 15477 Type 3, EN 12004-1 C2TE)Large / thin tiles with no vertical slip; balconies, bathrooms, commercial / residential, facades, swimming pools and heavy-trafficked floors; 2.5–3 kg/m² for 3 mm layer
Request details
Sika
SikaCeram-288 Flex S1
Deformable cementitious adhesive (IS 15477 Type 4, EN 12004-1 C2TES1)Thin / large tiles in demanding applications: balconies, bathrooms, heated floors, swimming pools and facades; indoor / outdoor; ~2.25–2.75 kg/m² for 3 mm layer
Request details
Sika
SikaCeram-428 Super Bond T
Polyurethane tile adhesive (EN 12004-1 R2T)Ideal for natural stone and marble; kitchens, wood, iron surfaces, heating screeds and large / thin tiles; highly elastic; ~4.5 kg/m² for 3 mm bed thickness
Request details
Sika
SikaCeram-850 Design
2-part epoxy coloured groutGlossy finish grout for floor / wall tiles in wet rooms, shopping malls, hospitals, kitchens and swimming pools; chemical and abrasion resistant; 400 ml cartridge covers ~8–10 m² (2 x 2 tile, 2 mm joint)
Request details
Sika
SikaCeram-888 Tile Grout EP
Water-cleanable epoxy grout / adhesiveChemical resistant, waterproof grout for swimming pools, laboratories, kitchens and hospitals; 1 kg covers ~12.5 m² (2 x 2 tile, 2 mm joint)
Request details
Sika
SikaCeram 100MT
3-component epoxy tile groutJoints in vitrified, ceramic, mosaic and natural stone tiles; indoor and outdoor use, swimming pools and food production areas; 3 kg yields ~1.7 L of grout
Request details
Sika
Sika Tilogrout
Cementitious coloured tile groutReady-to-use grout for wall / floor joints of ceramic, mosaic and marble tiles; 1 kg covers 4 sqm for 150 mm x 150 mm tile
Request details
Sika
Sika SealTape F
Elastic sealing tapeWaterproofing corners, wall-floor connections and pipe entries in wet rooms, swimming pools, balconies and terraces; ~0.66 mm thick; 10 m / 50 m rolls
Request details
Sika
SikaCeram-488 Floor Leveler
Polymer-modified floor levelling compoundSelf-smoothing, quick drying compound for interior subfloors before ceramic tiles, linoleum, vinyl and carpet; ~1.5 kg/m² per mm thickness
Request detailsSika Watertight Injection Systems 6
About Watertight Injection Systems
Sika
Sika Injection-101 IN PI 5 kg
Fast foaming PU injectionLow viscous, fast foaming two component polyurethane injection for stopping water leaks and waterproofing cracks and joints in concrete; gel time ~10 seconds
Request details
Sika
Sika Injection-201 CE
Elastic PU injection resinVery low viscous, solvent-free resin for permanent watertight sealing of dry, damp or water-bearing cracks and joints in concrete, brickwork and stone; CE marked to EN 1504-5; KTW drinking water certificate
Request details
Sika
SikaInject 155
One component PU injection foamStops small to mid-volume water ingress; 25 kg resin + 2.5 kg accelerator
Request details
Sika
SikaInject 255 ST
Two component PU injection resinSolvent-free resin specifically designed for rapid water stopping and ground consolidation
Request details
Sika
SikaInject 860
Micro fine cement for injectionMicro fine portland cement for injection into rock and soil with a blaine value of 600 m²/kg
Request details
Sika
SikaInject 633 IN
Hydrophilic injection groutSolvent-free, low viscosity grout for injection and consolidation of sandy and silty strata; 250 kg barrel
Request detailsMore brands
Other Brands We Supply
Full product lists for the other manufacturers we supply.
FAQ
Sika Products: Common Questions
Quick answers to the questions customers ask us most.
Still have a question?
Call +91 94131 31576 or send us an enquiry.
01 Where can I buy Sika products in Jodhpur?
Hind Agencies supplies Sika construction chemicals from Plot No. 05, near Ashiana Dwarka, Pal Sangaria Link Road, Jodhpur 342013. Call +91 94131 31576, +91 76650 13576 or +91 90019 16576, or email sales@hindjodhpur.com.
02 Is Sika good for waterproofing?
Yes. We supply 34 Sika waterproofing products, from coatings to membranes. The result depends on choosing the right product for the area (roof, basement, bathroom or tank) and applying it correctly. See the waterproofing guide.
03 Sika or Fosroc: which is better?
Both are leading brands with products for every application. The better choice depends on the specific product, your specification and availability. We supply both Sika and Fosroc and can suggest equivalent products side by side.
04 Do you supply Sika products outside Jodhpur?
Yes. Along with Jodhpur, we supply to Barmer, Jaisalmer, Pali and other places in Rajasthan, and to Gujarat, Madhya Pradesh, Leh–Ladakh and other parts of India.
05 How do I get the Sika price list or a quotation?
Send us the products and quantities you need, or your BOQ, through the enquiry form or WhatsApp. We will reply with availability and a quotation.
06 Can you suggest the right Sika product for my application?
Yes. Tell us what you are building or repairing, the surface and the exposure conditions, and we will help you match the product to your specification.
Need Sika Products for Your Project?
Send us your product list or BOQ and we will reply with availability and a quotation.