Flooring Solutions

Applications

• Warehouse floors
• Manufacturing areas
• Grain processing areas
• High pedestrian traffic

Features & Benefits

• Consolidates & hardens
• Irreversible chemistry
• Works even on old floors
• High performance formula

Usage Guidelines

Stir well before use. Roughen the substrate to expose pores. Apply 2–3 times for full crystallisation. Use a buffing machine to get shine.

Estimation

4 to 8 m² per litre in 2–3 coats, depending on substrate

Applications

• Heavy traffic areas
• Manufacturing areas
• Warehouses & stores
• Parking decks & ramps

Features & Benefits

• Hardness of 8–9 Mohs
• Non-rusting formula
• Hard wearing, long lasting
• Suits vacuum dewatered floors

Usage Guidelines

Apply in two turns, 2/3 in the 1st and 1/3 in the second. Ensure to dry shake and finish before final setting of concrete.

Estimation

3–8 kg/m² based on the intensity of traffic and load

Applications

• High pedestrian traffic
• Manufacturing areas
• Warehouses & stores
• Parking decks & ramps

Features & Benefits

• Hardness of 7–8 Mohs
• Non-rusting formula
• Hard wearing, long lasting
• Suits vacuum dewatered floors

Usage Guidelines

Apply in two turns, 2/3 in the 1st and 1/3 in the second. Ensure to dry shake and finish before final setting of concrete.

Estimation

3–8 kg/m² based on the intensity of traffic and load

Applications

• Soft wheel traffic areas
• Water & food storage
• Packing lines
• Underground car parks

Features & Benefits

• Moisture insensitive, breathes
• Improves lighting in the area
• Semi-gloss, smooth finish
• Non-toxic, potable grade

Usage Guidelines

Mix the two components using a slow-speed stirrer. Apply using brush / roller in two–three coats to a smooth, satin finish.

Estimation

8–10 m² per pack in 2–3 coats

Applications

• Dynamic loads
• Frequent movements
• Automotive parts
• Assembly areas

Features & Benefits

• 2–4 mm thick
• Long lasting, aesthetic finish
• Accommodates movements
• Tough & scratch resistant

Usage Guidelines

Mix all components using a slow-speed stirrer. Apply using a trowel in a single layer and finish using a spike roller to a smooth surface.

Estimation

Multi-layer system, please refer datasheet.

Applications

• Clean rooms
• Chemical process areas
• Food & beverages
• Bulk drug plants

Features & Benefits

• 6–12 mm thick
• Anti-bacterial finish
• Excellent chemical resistance
• Long lasting, proven solution

Usage Guidelines

Mix all components using a slow-speed stirrer. Apply with a serrated trowel and finish with a spike roller / pin-screed.

Estimation

8–10 kg/m² at 4 mm thickness

Applications

• Wet process areas
• Chemical process areas
• Food & beverages
• Bulk drug plants

Features & Benefits

• 6–12 mm thick
• Serviceable from –40 °C to 130 °C
• Excellent chemical resistance
• Excellent impact resistance

Usage Guidelines

Mix all components using a slow-speed stirrer. Apply with a serrated trowel and finish with a spike roller / pin-screed.

Estimation

12–14 kg/m² at 6 mm thickness

Applications

• Food, beverage, pharmaceutical and chemical industries
• Wet and dry process environments

Features & Benefits

• Solvent free and non-tainting
• Robust, long-lived floor
• High mechanical strength and a low elastic modulus
• Able to withstand severe impact loads

Usage Guidelines

Refer to the product datasheet for the detailed instructions for installation.

Estimation

4 mm: 10–11 kg/m² · 6 mm: 12–14 kg/m²

Applications

• Clean rooms
• Solvent handling areas
• Operation theatres
• Electronics plants

Features & Benefits

• 4–6 mm thick
• Anti-bacterial finish
• Excellent chemical resistance
• Long lasting, proven solution

Usage Guidelines

Mix all four components using a slow-speed stirrer. Apply with a serrated trowel and finish with a spike roller / pin-screed.

Estimation

8–10 kg/m² at 4 mm thickness